Microwave laboratory equipment

Microwave plasma source for gas refinement

Laboratory-scale reactor was designed and manufactured for Faculty of Mechanical and Power Engineering from Wroclaw University of Technology. The device is the prototype of presently developing microwave plasma source for refinment gases from tars on industrial scale. The process of cracking long-chain hydrocarbons arises from high-temperature plasma which contains reactive radicals, ions and high-energetic electrons. The temperature inside plasma can reach 2000-6000 K.

Laboratory hybrid drier for loose materials

The SH-I laboratory microwave drier, allowing to carry out laboratory scale research of processes of drying materials with air of specific temperature, with the option of supporting the process of drying with microwaves. The process of drying is performed on a rotary scale, on which samples of maximum mass of 1 kg can be placed.

Laboratory hybrid ultrasound-assisted convective-microwave drier

The MCU laboratory microwave drier, allowing to carry out laboratory scale research of processes of drying materials with air of specific temperature, with the possibility of supporting the process of drying with microwaves and ultrasounds. The process of drying is performed in a rotary cavity. The drier is equipped with additional pipe for fast cooling down material after drying process.
The drier is equipped with an ultrasound transducer by Pusonics, power of 200 W, which enables the transmission of ultrasounds through air directly to the layer of material being dried.

Laboratory hybrid drier – drum version

Relatively large size of the drier allows to dry 2-3 kg of biological material at a time, which enables the user to precisely optimize the drying processes before implementing a procedure on an industrial scale.

As in the case of the LHD1-D drier, the device is equipped with an ultrasound transducer, which emits a wave of frequency of ca. 26 kHz.

Laboratory-scale microwave reactor IR

Laboratory-scale microwave reactor can be utilized in processes like curing resin, condensation through evaporation of dissolvent, microwave drying etc. Device is equipped with IR thermomter for continous measurments of temperature of sample. Therefore operator is able to choose max. temperature obtained by processed material.

Laboratory hybrid drier – chamber version

The SH-I laboratory microwave drier, allowing to carry out laboratory scale research of processes of drying materials with air of specific temperature, with the option of supporting the process of drying with microwaves and ultrasounds. The process of drying is performed on a rotary scale, on which samples of maximum mass of 1 kg can be placed.
The drier is equipped with an ultrasound transducer by Pusonics, power of 200 W, which enables the transmission of ultrasounds through air directly to the layer of material being dried.

Plasma installation for gasifying organic waste

Plasma device.

Constructed for Wrocław Technical University. Designed for testing the processes of gasifying organic material with the use of plasma.

Microwave plasma generators

Sets of devices for plasma generation, made in various configurations to meet the orderer’s requirements.

Microwave set for production of carbon nano-tubes

The latest version of the device made for Łódź Technical University. The set is designed for applying carbon nano-tubes with the use of microwave induced plasma. The nano-tubes are applied onto steel tapes, which slide automatically.

Microwave reactor for utilization of asbestos

In this reactor, successful utilization of asbestos with the use of microwaves is carried out.

Laboratory reactor for testing sewage sludge

Laboratory reactor for testing sewage sludge. Made for French company Inertec

Set of microwave driers

Made for the Institute of Fruit Farming and Floriculture in Skierniewice, Poland. The set consists of a microwave pulse-and-fluidization drier with constant mass measurement, and a microwave vacuum drier.

Microwave convective drier

Conventional laboratory-scale drier allows to dry samples using two methods: convective and by microwaves. Addidionally drier is equipped with weighing samples in-line. Frequency of measurments is set up by operator. Construction of drier enables to operate all parameteres listes below in their range.

Microwave vacuum drier

Microwave drier equipped in vacuum and constant recording of temperature of dried material. Microwaves are emitted into a metal chamber through one or two special radiators connected with the microwave generators (depending on the option of manufacture). The way of placing the microwave radiator and its shape has been selected in such a way to provide good energetic adjustment of generator and inside the drum and to provide good energetic adjustment of the generator and the material being heated up (good transmission of microwaves to the material to be dried).

High-temperature microwave stove

The inside of the stove is heated up with microwaves up to 1200 C. Microwave set is equipped with 2 x 600 W microwave generators air-cooled.

Microwave estrificator

Laboratory estrificator. Estrification takes place during the flow of reagents through the microwave chamber.

Device for synthesising titanium compounds

Synthesis of titanium carbide is initiated with microwaves

Microwave carbonizer

Gases which are created during gasification of organic materials are mixed with air and burnt completely in the upper part of the device, which is heated by microwaves.

Mortadella heater

Device for testing the process of heating up mortadella with microwaves. While heated up, mortadella is rotated on rollers made of polypropylene; quick heating up of all volume follows.

Microwave generator power supply

Microwave generator power pack with fluid power regulation. Depending on microwave generator we offer 1000 W, 2000 W and 3000 W power supplies. LC power supply 230 V, 50 Hz or 3×400 V depending on model.

Microwave generator

Microwave generator with microwave power up to 3000 W. The generator creates a continuous wave with frequency of 2.45GHz. Generators are offered as water-cooled and air cooled. Power supply consist of two connectors: high voltage 4,2 kW LEMO (or permanent connetion) and 230 V HTS plug.